Toilet Roll Holder Grab Bar


Invisia Toilet Roll Holder Grab Bar



This is a stunning addition for any bathroom, offering discreet support by the toilet, providing easy accessibility without sacrificing design and décor. This elegant design can support up to 500 pounds of weight when secured to mounting structures, making it an ideal and attractive safety accessory for any bathroom.

  • ADA Compliant. Supports up to 500lbs / 227kgs when installed to structural wood backing (see below for details)
  • Discreet wall stems with concealed screws. Makes mounting areas virtually invisible.
  • Multi-contact wall support. 4 points of contact for maximum structural support


Material Stainless steel
Finish/Colour Polished Chrome (-CP)
Brushed Stainless (-BS)
Powder Coat Bronze (-ORB)
Powder Coat Matte Black (-BLK)
Weight Capacity 500lbs / 227kgs (ADA Compliant)
Note: Reduced weight capacity if installed using hollow wall anchors.
Rail Diameter 1.25″ / 31.8mm (ADA Compliant)
Wall Clearance 1.50″ / 38.1mm (ADA Compliant)
Rail Width 7.25″ / 184mm
Rail Height 13″ / 330mm
Installation Mechanism Must screw to wood backing behind wall. Hollow wall anchors can be used when partial wood structure is available (Note: Reduced weight capacity).
Installation Hardware/Fasteners Full Structure: #10 x 3″/76mm length, stainless steel wood screw (x1) and #10 x 2″/51mm length, stainless steel wood screw (x3).
Partial Structure: #10 x 3″/76mm length, stainless steel wood screw (x1) and #10 x 2″/51mm length, stainless steel wood screw (x1) and 3/16-24 x 3”/76mm length, stainless steel bolt and hollow wall anchors (x2).
Fasteners Exposed or Concealed Concealed; Rail stems conceal mounting hardware + Plastic caps (x3).
Commercial Use Yes
Residential Use Yes
Water Resistant Yes
Rust Resistant Yes
Country of Origin China
Shipping Dimensions 14x9x4″ / 356x229x102mm
Shipping Weight 4lbs / 1.8kgs
Warranty Limited lifetime warranty

f there is partial structure for mounting (i.e. minimum two centre points fastened into structural wood and no structure available for other contact points), we recommend hollow wall anchors (supplied) for the contact points with no structure. This will reduce the weight capacity to 350lbs/159kg

Products are covered by a limited lifetime manufacturer’s warranty against defects in materials and workmanship for the original purchaser. Warranty excludes damage caused by misuse, wood material and stain, accidental damage, alteration, normal wear and tear, or the use of corrosive or abrasive cleaning products. The manufacturer shall not be liable for indirect, consequential damages, or for the cost of any corrective work done without HealthCraft Products Inc. prior approval. Total liability shall in no event exceed the purchase price of the goods. For complete warranty information, see the instructions for terms and conditions.

Click to Download Spec Sheet

Installation Instructions

Additional information

Weight 2 kg
Metal Finishes

, , ,