Sale!

Soap Dish & Grab Bar

$233.00$254.00

Invisia Soap Dish and Grab Bar

Description

SOAP DISH

Offering just the right amount of assistance, this Soap Dish is much more than a stunning decorative feature. Not only does it provide a convenient place to store a bar of soap, it offers exceptional support and stylish design for ease of use and peace of mind. The dish itself is easy to remove, allowing for convenient cleaning, letting you keep your shower spotless with minimal effort.

  • ADA Compliant. Supports up to 500lbs / 227kgs when installed to structural wood backing (see below for details)
  • Discreet wall stems with concealed screws. Makes mounting areas virtually invisible.
  • Multi-contact wall support. 4 points of contact for maximum structural support
  • Solid surface tray – Shatterproof tray resists the growth of mold and bacteria.

SPECIFICATIONS

Material Stainless steel
Finish/Colour Brushed Stainless (-BS)
Powder Coat Bronze (-ORB)
Powder Coat Matte Black (-BLK)
Tray Material Solid surface material
Weight Capacity 500lbs / 227kgs (ADA Compliant)
Note: Reduced weight capacity if installed using hollow wall anchors.
Rail Diameter 1.25″ / 31.8mm (ADA Compliant)
Wall Clearance 1.50″ / 38.1mm (ADA Compliant)
Rail Width 12.10″ / 307mm
Rail Height 13″/ 330mm
Installation Mechanism Must screw to wood backing behind wall. Hollow wall anchors can be used when no wood structure is available (Note: Reduced weight capacity).
Installation Hardware/Fasteners Full Structure:#10 x 3″ / 76mm length, stainless steel wood screw (x3).
Hollow Walls (no structure): 3/16-24 x 3”/76mm length, stainless steel bolt and hollow wall anchors (x3).
Fasteners Exposed or Concealed Rail stems conceal mounting hardware.
Commercial Use Yes
Residential Use Yes
Water Resistant Yes
Rust Resistant Yes
Country of Origin China
Shipping Dimensions 14x13x4″ / 356x330x102mm
Shipping Weight 5lbs / 2.3kgs
Warranty Limited lifetime warranty

If there is partial structure for mounting (i.e. minimum one point fastens into structural wood and no structure available for other contact points), we recommend hollow wall anchors (supplied) for the contact points with no structure. This will reduce the weight capacity to 350lbs/159kg.

If there is no structure for mounting, we recommend hollow wall anchors (supplied) for all contact points. This will reduce the weight capacity to 200lbs/91kg.

The tray is made from a durable, non-porous, solid surface material that resists the growth of bacteria. It can be cleaned with general household cleaners.

Products are covered by a limited lifetime manufacturer’s warranty against defects in materials and workmanship for the original purchaser. Warranty excludes damage caused by misuse, wood material and stain, accidental damage, alteration, normal wear and tear, or the use of corrosive or abrasive cleaning products. The manufacturer shall not be liable for indirect, consequential damages, or for the cost of any corrective work done without HealthCraft Products Inc. prior approval. Total liability shall in no event exceed the purchase price of the goods. For complete warranty information, see the instructions for terms and conditions.

Click to Download Spec Sheet

Installation Instructions

Additional information

Weight 2.5 kg
Metal Finishes

, ,