24 Inch Accent Bar


24″ Invisia Grab Bar



Invisia’s Accent Bar is a bold and stylish way to add new life to the safety features of any bathroom. With a user-weight capacity that can support up to 500lbs / 227kgs, the decorative Accent Bar grants users peace of mind without compromising the beauty of the space. Featuring several colour options to complement décor, the luxurious Accent Bar can be installed anywhere—and at any angle—that support is needed.

Stylish with multiple finishes to choose from, the Accent Bar is a statement piece that provides you with superb support. No one will know this elegant accessory can hold up to 500 lbs in weight. Enjoy seamless design with discreetly concealed wall screws.

  • ADA Compliant Supports up to 500lbs / 227kgs when installed to structural wood backing
  • Flange cover conceals mounting screws Makes mounting areas virtually invisible.
  • Vertical, horizontal or angled installation Flange can rotate to accommodate wood stud spacing up to 16” / 406mm centers.
  • While the Accent Bar is 24” / 61cm in length, it installs into 16” / 41cm stud spacing.
  • Products are covered by a limited lifetime manufacturer warranty against defects in materials and workmanship for the original purchaser. Warranty excludes damage caused by misuse, wood material and stain, accidental damage, alteration, normal wear and tear, or the use of corrosive or abrasive cleaning products. The manufacturer shall not be liable for indirect, consequential damages, or for the cost of any corrective work done without HealthCraft Products Inc. prior approval. Total liability shall in no event exceed the purchase price of the goods. For complete warranty information, see the instructions for terms and conditions.
Material Stainless steel
Finish / Colour Polished Chrome (-CP)
Brushed Stainless (-BS)
Powder Coat Bronze (-ORB)
Powder Coat Matte Black (-BLK)
Weight Capacity 500lbs / 227kgs (ADA Compliant)
Rail Diameter 1.25″ / 31.8mm (ADA Compliant)
Wall Clearance 1.50″ / 38.1mm (ADA Compliant)
Rail Length 24″ / 610mm
Installation Mechanism Must screw to wood backing behind wall.
Aligns with 16″ / 406mm stud spacing.
Installation Hardware/Fasteners #10 x 2″ / 51mm length, stainless steel wood screws (x4).
Fasteners Exposed or Concealed Concealed; flange covers conceal mounting hardware.
Commercial Use Yes
Residential Use Yes
Water Resistant Yes
Rust Resistant Yes
Country of Origin China
Shipping Dimensions 27x4x4″ / 686x102x102mm
Shipping Weight 4lbs / 1.8kgs
Warranty Limited lifetime warranty

Click to Download Spec Sheet

Click to Download Installation Instructions

Additional information

Weight 2 kg