Invisia’s Accent Ring is a decorative grab bar that elegantly frames your shower valve while also providing unparalleled support. Designed to support a user weight capacity of up to 500lbs / 227kgs, the Accent Ring combines elegance with safety so you can experience peace of mind when you shower. One of our top-selling luxury bathroom accessories, the Accent Ring is perfect to hold onto when adjusting your water controls and simultaneously protects your fixture investments.
- ADA Compliant. Supports up to 500lbs / 227kgs when installed to structural wood backing (see below for details)
- Discreet wall stems with concealed screws. Makes mounting areas virtually invisible.
- Multi-contact wall support. 4 points of contact for maximum structural support
ACCENT RING SPECIFICATIONS
|Finish / Colour||Polished Chrome (-CP)
Brushed Stainless (-BS)
Powder Coat Bronze (-ORB)
Powder Coat Matte Black (-BLK)
|Weight Capacity||500lbs / 227kgs (ADA Compliant)Note: Reduced weight capacity if installed using hollow wall anchors.|
|Rail Diameter||1.25″ / 31.8mm (ADA Compliant)|
|Wall Clearance||1.50″ / 38.1mm (ADA Compliant)|
|Rail Width||12.1″ / 307mm|
|Rail Height||10.3″ / 262mm|
|Installation Mechanism||Must screw to wood backing behind wall. Hollow wall anchors can be used when no wood structure is available (Note: Reduced weight capacity).|
|Installation Hardware/Fasteners||Full Structure:#10 x 3″ / 76mm length, stainless steel wood screw (x4).Hollow Walls (no structure):3/16-24 x 3″ / 76mm length, stainless steel bolt and hollow wall anchors (x4).|
|Fasteners Exposed or Concealed||Concealed; Rail stems conceal mounting hardware.|
|Country of Origin||China|
|Shipping Dimensions||14x13x4″ / 356x330x102mm|
|Shipping Weight||5lbs / 2.3kgs|
|Warranty||Limited lifetime warranty|
If there is partial structure for mounting (i.e. minimum one point fastens into structural wood and no structure available for other contact points), we recommend hollow wall anchors (supplied) for the contact points with no structure. This will reduce the weight capacity to 350lbs/159kg.
If there is no structure for mounting, we recommend hollow wall anchors (supplied) for all contact points. This will reduce the weight capacity to 200lbs/90.7kg.
Products are covered by a limited lifetime manufacturer’s warranty against defects in materials and workmanship for the original purchaser. Warranty excludes damage caused by misuse, wood material and stain, accidental damage, alteration, normal wear and tear, or the use of corrosive or abrasive cleaning products. The manufacturer shall not be liable for indirect, consequential damages, or for the cost of any corrective work done without HealthCraft Products Inc. prior approval. Total liability shall in no event exceed the purchase price of the goods. For complete warranty information, see the instructions for terms and conditions.